Your dad knew his stuff. Fish hooks can be nasty if they’re not properly removed, because that barb will rip everything on the way out.

Yup, medics will just wrap the entire hand in tape and gauze to keep it stable, then transport to the hospital. Because it’s always possible that removal will require surgery, so they want to be near an operating room before they try.

Yeah, Harry just wanted to steal everything and vanish. His primary concern was simply getting away without any witnesses, so they could ghost with the money they had stolen. He wasn’t going to bother with petty theft, and was content to stay on the down low if it meant they’d be safe from the law.

Marv was portrayed as being the dumb one, but he was outright sociopathic in his actions, and had zero qualms about blatantly harming others if it meant he’d get famous. His primary concern was with garnering infamy and making a name for themselves as thieves. He wanted everyone to know that the Wet Bandits had stolen from them. And that is diametrically opposed to Harry’s goal of ghosting after their big score.

I also don’t, simply because my high school had a string of vandalism where some kid was pulling all of the water fountains out of the walls. Like he was just ripping them straight out. There’s no way they could support someone putting their entire body weight on it to shove the spout up their ass.

Or just buy a domain for like $12 and use it for catch-all email. My custom domain routes everything to a single inbox, and I can tailor the email address specifically to who/what I’m making an account for. And if I ever see spam hit that address, I can just set a rule to automatically spam anything that comes in at that address.

For example, maybe I sign up for a Target account using Target@[mydomain]. Then a few weeks later, I see spam addressed to Target@[mydomain]. I now know Target has sold my info, and I can automatically route everything addressed to Target@[mydomain] directly to spam. Now I have no more spam hitting my inbox, because it all automatically gets sent straight to spam.

Yeah there’s a reason retirement homes serve breakfast at like 5AM and dinner by like 5PM. As you get older, your circadian rhythm tends to drift more towards waking and sleeping early.

I tend to front-load my comments as much as possible, to try and avoid just that. Make the main point ASAP. But even then, there’s only so much you can do without sounding messy.

For instance, I front-loaded the part about reader comprehension. All of the “why” is in later paragraphs. But even if they only read the first few sentences, they’ll at least get my overall point.

It does make nuanced discussion impossible though. I work in a pretty specialized field (professional audio) with lots of snake oil myths about what will or won’t make your system sound better. There have been several times that I have seen people parroting this snake oil type stuff as if it is genuine advice. And often, this advice happens because the person only has a surface-level understanding of how audio works. Something sounds plausible, (and they don’t understand the underlying principles that would disprove it,) so they end up perpetuating the myth. So a lot of discussions boil down to “well kind of but not really” and people won’t bother reading anything past the “well kind of” part.

Ding ding ding. I actively refuse to do homework from randos on the internet.

This is also due to a distinct drop in reader comprehension. One of the largest parts of reading comprehension is being able to infer the intended audience for a particular piece of work. You should be able to read a news article, see a commercial, read a comment, etc and infer who it is aimed at.

People have become accustomed to having an algorithm that is laser focused to their specific preferences. So when they see something that’s not aimed at them it is jarring, and they tend to get upset. Instead of going “oh this clearly isn’t aimed at me, but I can infer who the intended audience is. I’ll move on.” Now they tend to jump on the creator with whataboutisms and imagined offense.

Maybe you make a post about the proper way to throw a football. You’ll inevitably get a few “bUT wHaT abOUt WhEElcHaiR uSerS, I hAvE a baD ShoUlDer aNd cAn’T thROW SO wHaT abOUt me, I haTE FoOtbAll wHY aRe yOU SHowiNG tHIs to Me, etc” types of comments. It’s because those users have lost the ability to infer an intended audience. They automatically assume everything they see is aimed at them, and get offended when it isn’t.

I have even noticed this started to affect the way media is written. Creators tend to make it a point to outright state their intended audience, just to avoid the negative comments.

Cold water and dish soap is the way to go. Hot water runs the risk of delaminating the coating layer, and hand soap tends to have moisturizers that will stick to the lens. Microfibers are too abrasive, and don’t adequately lift debris away from the lens. Just lather a drop of soap to cut the oils, then rinse. If your oleophobic coating is still good and water slicks off the lens, you can even turn the faucet low and just run a trickle across the lens to dry them. So you literally never need to touch the lens with a towel or microfiber cloth.

If you only ever use soap and cold water, your oleophobic coating will last for literal years. I’ve had my current pair for almost two years now, with no scratches and my oleophobic coating is still just fine. Lens cleaners, glass cleaners, etc all strip that coating away. And microfibers are bad about causing tiny scratches that build up over time, since they drag dust and debris across the lens as you wipe them. In contrast, water gently carries dust and debris away without scratching, then the soap removes the oily fingerprints and smudges without damaging the coating.

If you’re referring to the wavy pattern along the cutting edge, that’s not from the folding process. The hamon is added to the blade during the quenching process, by adding clay to the steel. The clay causes the covered steel to heat differently than the uncovered steel. That differential heating is what is visible as the hamon.

It’s largely decorative, but does have function as it determines what part of the blade can be sharpened to an edge.

Yeah, Japanese steel wasn’t great, but they were working with what they had available at the time. Katanas were basically made out of iron dust, which had been melted into slag by filtering through charcoal. The resulting chunks of steel were basically straight up slag, not nice even ingots. So the steel they got was actually extremely high carbon in places, but that also meant it was brittle as hell, because those carbon pockets were prone to shattering.

So the folding was invented, to even out the steel’s carbon content (just like how a Damascus steel blade has visible stripes, Japanese steel had invisible stripes of high and low carbon steel) and to lower the carbon content overall; Every time you heat for another fold, you’re evaporating some carbon. So the folding process took the steel from extremely high carbon pockets to a more evenly distributed carbon content.

Now that modern steel processing exists, the only real reason to stick to the folding method is tradition. There’s no need to fold modern steel ingots because they’re already homogenous and can be produced at whatever carbon level you want.

MGSV got much better once I figured out how CQC and holdups worked. CQC lets you drop someone without using ammo. You can move them while they’re unconscious, and then wake them up with a kick. Once they’re awake, you can hold them up while they’re on the ground. If they’re held up, they’ll stay on the ground permanently (unless another guard finds them and gets them up). So you can capture an entire base without using ammo, simply by finding a quiet corner to stash your guards in; You don’t need to worry about them waking up from a knockout, cuz the holdup keeps them down.

Target is notorious for this. Loss Prevention has literal evidence binders for repeat offenders. They’ll tally up everything you’ve stolen, and then sit on it and continue tallying until you have stolen enough to be charged with a felony. Once they have a dollar over their local felony amount, they’ll send their LP team in to pull you aside and you get arrested for felony grand theft.

Which is a very easily recognized pattern, color, and size. The entire point of a dollar is that every single one looks identical.

Imagine if every single dollar bill was a different color, shape, size, printing pattern, etc… Now imagine trying to block that. Now consider that as soon as you figure out how to block all of the current versions, anyone in the world can just design a new version in 5 minutes.

Shit you get to print yours? Look at moneybags over here. I have to copy the broad strokes down by hand, and walk back and forth between my console and the family computer on the opposite side of the house T.T

I’d argue that’s not ironic at all; It’s perfectly placed.

I attended a PETA workshop about a healthy plant-based diet a couple years ago and everybody agreed on that.

Yeah, PETA wants to be the only ones who kill housepets. If all the cats are dead from vegan diets, there won’t be any left for PETA to kidnap and euthanize.
/s but not really because PETA habitually steals pets and immediately euthanizes them before the owner can reclaim them.

Even worse, many of those scammy companies use the Do Not Call list as a list of known active numbers. Since the DNC is an opt-in thing, the call centers know that people have proactively added their numbers to the list.